(( Patterns )) How to tie #36940 - bordered chevron
| Table of contents |
|---|
| 1 - Beginning Notes 2 - Steps 3 - Video |
Beginning Notes
You should know how to make the chevron before you attempt this bracelet.
Difficulty: Very Easy
Materials: 5 strings approximately 70 inches long. This length can vary depending on your wrist size. You will need two strings of each colour for the chevron itself and one string for the border.
Steps
Step 1:
Begin by making a loop to fold the strings in half. You can use which method you are more comfortable with at this point (simple loop, buckle etc.)
You string order should be as follows:
| A | B | C | B | C | C | B | C | B | A |
Step 2:
Take the string that is farthest to the right and left(String A). That will be your border color. Tie the A string on the right onto the B string using a backward-forward knot. A should return to it's original position.
Step 3:
Reverse step two using the A string on the left hand side. This time you will use a forward-backward knot
Step 4:
Using the B string on the right, use backward knots to form a chevron over string C, B & C. Take the B string on the left and repeat the process using forward knots over strings C, B & C. Tie the two B strings that are now in the center with a forward knot
Step 5:
Repeat steps 2 - 4 until you reach the desired length
Video
Editors
The original author of this tutorial is tazemaster but it was also edited by Huntress, Ducttape10, gracebri, RockePloeger, Sareana, Foz, flopy and k_marie.
Uploaded photos (see all 10)
Comments