(( Beginner Tutorial )) How to make #2 - chevron
This tutorial is dedicated to pattern #2.
|Table of contents||1. Introduct|
2. Strings and setup
3. How to
3.1. Step 1
3.2. Step 2
3.3. Step 3
3.4. Step 4
5. Another alternati
Strings and setup
To make this bracelet, you will need yarn or threads in different colors. In this example I've used 8 threads. The length should be about 50 cm (20 in) when you start to tie. Below you see a solution for starting using an overhand knot.
Start with the leftmost and rightmost strings and make forward knots (and backward knots, respectiv
If you've done it right, it will look about like this.
Continue to make knots towards the middle, using the same pair of strings. When they meet in the middle, make either a forward- or backward knot, it doesn't matter.
Repeat steps 1 to 4 until the bracelet is long enough.
ve tutorial by kallum
Looks good with: An even number of strings (6 is best for a first time).
What you need: 6+ strings, 2 strings of each color.
Strings should be: 2-3 feet. (24-36 in.)
This tutorial will teach with: Red, yellow, and blue.
You need to know how to do: Forward Knots (f/k) and Backward Knots (b/k) REMEMBER: TIE DOUBLE KNOTS!
It helps that you know how to make the: Diagonal/
Other Info: The hardest part is tying the strings together in the middle. If you need help, please send me a private message to user "monkshood". Don't hesitate! Just ask!
Step 1. Order of string should be: Red, yellow, blue, blue, yellow, red.
Step 2. Take the red string on the LEFT and tie a f/k onto the yellow string. Then tie another f/k onto the first blue string. That red should now be one of the middle strings.
Step 3. Take the red string on the RIGHT and tie a b/k onto the yellow string on the right. Then tie another b/k onto the blue string in the middle. Now BOTH red string should be side-by-s
Step 4. Tie the red strings together, using ANY kind of knot. After the first few "arrows" they will automatic
Another alternatiHere's how to make the Chevron/A
ve tutorial by experthi5 r
YOU WILL NEED: 8 strings, 4 colors, 2 strings for each color
CODE: Black (1) Yellow (2) Red (3) White (4) (You don't need to have the same colors as I do, but it'll be easier for you if you're a beginner)
Set up like this:
1 2 3 4 4 3 2 1
Using the four strings on the left, use 1 to tie two overhand knots on 2. After that, the knot should have made strings 1 & 2 switch places. Now tie 1 onto 3 twice, like you did earlier with 1 & 2. Now do the same with 4.
Now 1 should have made a line of three knots, making it look like this:
2 3 4 1 4 3 2 1
Do the same with the 4 strings on the right, tying 1 onto 2, 3, and 4 twice.
Then it should look like this:
2 3 4 1 1 4 3 2
Then tie the 1's in the middle together twice.
Repeat the instructi
The video below shows how to make a chevron bracelet using 8 strings, followed by a 10 string instructi
The original author of this tutorial is Stefan, but it has also been edited by Foz, Jeckle, RockePloeger, Sareana, piggyfan2, Kestrel, Alicat, moonaaxo, Twinkles and mysterytour. The tutorial was last updated 2 years ago.